Dark
DARK Stamping Polish 01
DARK Stamping Polish 01
Couldn't load pickup availability
STAMPING POLISH DARK - are stamping polishes that transfer easily with proper application, have a wide palette and rich pigmentation. They are not thick and work with all types of stamps.
APPLICATION METHOD: - perform a manicure and apply base/gel or color, cure in the lamp; - if there is a sticky layer, remove it using DARK GEL CLEANSER; - apply the polish on the plate, remove excess with a scraper and transfer the design to the stamp; - transfer the design from the stamp to the nail using a rolling or flat motion; - cover with top coat (if the top coat runs from the design, apply a thin layer of clear base first, then the top coat).
REASONS WHY THE DESIGN MIGHT NOT TRANSFER ON THE STAMP: 1. The polish should not be thickened, take enough polish on the brush to distribute over the design; 2. Apply the polish on the plate using 1-2 strokes; the longer you apply the polish, the less likely it is to transfer well, since the polish dries in the air; 3. Work with the scraper at an angle of approximately 45 degrees, without pressing down too hard to avoid 'squeezing' the polish out of the design; 4. Use the scraper quickly (2-4 strokes are sufficient), without sweeping across the entire plate; 5. Quickly set the scraper down and take the stamp in hand (remember that when working with polishes, we don’t have extra time); 6. Transfer the design to the stamp with a soft rolling motion, DO NOT try to PRESS the stamp firmly into the plate, the more you press, the more polish will remain in the plate.
Volume - 10 ml.
Share
